45 lines
1.1 KiB
Plaintext
45 lines
1.1 KiB
Plaintext
1. Install kamailio
|
|
- configure kamailio.cfg
|
|
# Module parameters
|
|
db_url for dispatcher
|
|
ds_ping_from for dispatcher
|
|
reg_contact_addr for uac
|
|
reg_db_url for uac
|
|
|
|
# Variables in request route section
|
|
$avp(customerpbxip)="10.0.5.4";
|
|
$avp(sip1)="10.0.5.7";
|
|
$avp(sip2)="10.0.5.5";
|
|
|
|
#TRUNKAUTH variables
|
|
$avp(auser) = "kam";
|
|
$avp(apass) = "kam";
|
|
|
|
- configure kamctlrc file for db access
|
|
|
|
2. Install rtpengine
|
|
- copy config file from this repository
|
|
3. Install mysql server (or use remote one)
|
|
- load database dump from this repository, example data is allready inside table uacreg
|
|
- configure outbound destination server parameters in uac_reg table using the examples inside
|
|
- configure dispatcher targets for outbound call routing in dispatcher table
|
|
4. Configure syslog to log call CDRS into separate file
|
|
- /etc/syslog.conf
|
|
local2.* -/var/log/cdrs.log
|
|
|
|
Example data:
|
|
10.0.5.4 ip of your main SIP server
|
|
10.0.5.6 ip of kamailio voip proxy
|
|
10.0.5.5 ip of secondary SIP server from your provider
|
|
10.0.5.7 ip of primary SIP server form your provider
|
|
registration user/pass is kam/kam
|
|
|
|
|
|
Check dispatcher status for routing:
|
|
kamcmd dispatcher.list
|
|
|
|
|
|
|
|
|
|
|