1. Install kamailio
	- configure kamailio.cfg
# Module parameters
	db_url for dispatcher
	ds_ping_from for dispatcher
	reg_contact_addr for uac
	reg_db_url for uac

# Variables in request route section
	$avp(customerpbxip)="10.0.5.4";
	$avp(sip1)="10.0.5.7";
	$avp(sip2)="10.0.5.5";

#TRUNKAUTH variables
	$avp(auser) = "kam";
	$avp(apass) = "kam";

	- configure kamctlrc file for db access

2. Install rtpengine
	- copy config file from this repository
3. Install mysql server (or use remote one)
	- load database dump from this repository, example data is allready inside table uacreg
	- configure outbound destination server parameters in uac_reg table using the examples inside
4. Configure syslog to log call CDRS into separate file 
	- /etc/syslog.conf
	local2.*            -/var/log/cdrs.log

Example data:
10.0.5.4 ip of your main SIP server
10.0.5.6 ip of kamailio voip proxy
10.0.5.5 ip of secondary SIP server from your provider
10.0.5.7 ip of primary SIP server form your provider
registration user/pass is kam/kam


Check dispatcher status for routing:
kamcmd dispatcher.list